14 www.kodak.com/go/support
Taking pictures and videos
Taking a video
NOTE: You can change optical zoom before (but not during) video recording.
1 Turn the Mode dial to Video .
2 Press the Menu button. Move the Joystick to highlight Video Size, then
press the OK button.
3 Move the Joystick to highlight the desired Size, then press the
OK button.
4 To eliminate camera noise during recording, turn off Continuous AF
(see page 34).
5 Use the EVF or LCD screen to frame your subject. (Press the EVF/LCD toggle button
to switch to the other screen, see
page 7.)
6 Press the Shutter button completely down and release. To stop recording, press
and release the Shutter button again.
During recording, REC blinks on the screen and the elapsed time is displayed.
NOTE: If you prefer, press the Shutter button completely down and hold it for more than
2 seconds to begin recording. To stop recording, release the Shutter button. Recording also stops if
the storage location is full. See
page 81 for video storage capacities.
To Next Page
Loading...
Need help?
General
