52 www.kodak.com/go/support
Reviewing pictures and videos
2 Select a display interval.
To scroll through the seconds quickly, hold the Joystick .
3 Press the OK button.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, move the Joystick to highlight Loop, then press
the OK button.
2 Move the Joystick to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 37). The slide show stops if you
connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera video-out port to the
television video-in port (yellow) and audio-in port (white). See your television
user’s guide for details.
2 Review pictures and videos on the television.
To Next Page
Loading...
Need help?
General
