Taking pictures and videos
www.kodak.com/go/support
23
1 Turn the Mode dial to P, A, S, M, or C.
The mode options are displayed.
2 Use the Jog dial:
■ Rotate the Jog dial to move the cursor between
the available settings.
■ Press the Jog dial to open a setting.
■ Rotate the Jog dial to change the setting .
■ Press the Jog dial to save the setting.
3 Press the Menu button to change other settings (see page 30).
4 Take a picture.
Using the flip-up flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
You can change the flash setting in most Still modes, except Burst; the default setting
is restored when you exit the mode or turn off the camera.
Turning on the flash
Slide the open flash switch to raise
the flash and to turn it on.
NOTE: The flash unit must be open
to use the flash and to change the flash
modes. An Open Flash warning appears
on the EVF/LCD screen when the flash unit
needs to be open.
open
switch
To Next Page
Loading...
