KODAK EKTAPRO
EM PROCESSOR
GROUND
Thumb screw ground connection provided as a convenience to
the user. The connection could be used to insure that external
devices, a trigger source for example, connected to the Processor
are at the same ground potential.
VCR REMOTE
Connection for the infrared remote control used by the Processor
to control a VCR during video download operations.
FRAME MRK OUT
BNC type connector that provides a ten volt pulse output. A
pulse is output at the beginning of each frame stored in memory.
COMM 1
Reserved for future use. RS232 format data communications
channel.
DATA LINK
Nine pin connector providing clock, sync and serial data connec-
tion to various assessories for the EKTAPRO EM Motion Analyzer,
Model 1012.
KEYPAD
Connection for the keypad cable providing power and signal
path between Processor and keypad.
IEEE 488
Standard GPIB (General Purpose Interface Bus) connector used
by the Computer Access Interface accessory. Digital video data
and limited machine control will be available through this
interface.
2.9
To Next Page
Loading...
