A-61626 January 2010 29
NOTES:
• This option is only available for duplex scanner models.
• This option is only available when Input document is is set to Two
Sided, Different settings per side is turned off and Images per side is
set to One; and the document is scanned from the Document Feeder.
Images per side — indicates how many images the scanner will create
for a side, based on you imaging selections.
• One: indicates you want the scanner to create one image.
• One - Based on Document Content: indicates you want the
scanner to automatically detect if the document is color/grayscale or
black and white.
• Multiple: indicates you want the scanner to create more than one
image.
NOTE: If you select One - Based on Document Content from the
Images per side option, the Content Settings tab will be
displayed.
Images to Configure — indicates which electronic images you need to
configure.
NOTE: This is only available if you select anything other than One from
the Images per side option. For procedures on how to configure
advanced options, see the sections that follow, entitled:
• Creating color/grayscale or black and white images based
on the content of your documents, Example 1.
• Creating multiple images for each side of a document,
Example 2.
• Creating different settings for each side of a document,
Example 3.
When available, use the up and down arrows to select the order the
images will be delivered by the scanner to the scanning application.
Toolbar buttons:
Done — returns you to the Image Settings window.
Add: adds an image type to the bottom of the configuration list.
Change: allows you to change the currently selected image
type.
Delete: removes the selected image type.
To Next Page
Loading...
