A-61626 January 2010 47
Diagnostics - Debug tab The Debug tab allows you to turn on options that allow support
personnel to diagnose any issues you may encounter with using your
scanner. It is suggested that you only make changes on this tab when
instructed by Kodak support personnel.
NOTES:
• All of the options on this tab apply to all Setting Shortcuts, not just the
currently selected Setting Shortcut, and are saved immediately.
• In order for any changes on this tab to take effect, you must restart
your application.
Logging — saves the communications between the scanner and a
scanning application. The options are: Off, On or Custom.
NOTE: Flag and Filter are only available for Custom.
Images - Received From Scanner — saves the images received at
the PC from the scanner.
To Next Page
Loading...
