14 A-61661 May 2010
Scanner tab The Scanner tab provides the following options.
Paper Source
NOTE: Flatbed options are only available if your scanner is equipped
with the Kodak i1400 Series A3 Flatbed Accessory.
• ADF: if you are scanning documents from the input tray.
• Flatbed: if you are scanning documents using the flatbed.
• ADF/Flatbed: when selected, the scanner will detect if the
document(s) to be scanned is in the ADF or on the flatbed.
Transport timeout — allows you to set the amount of time the scanner
will wait after the last document enters the transport before the
transport timeout action is taken. You can specify a time delay setting
from 1 to 300 seconds.
Energy Star — allows you to set the amount of time the scanner will
remain inactive before the scanner goes into an idle state. Choices are:
0 to 60 minutes. The default is 15 minutes.
Special Document Mode — allows you to scan irregularly shaped
documents (e.g., pages with coupons removed or documents with large
holes or cutouts in them) that may produce jams or truncated images.
NOTES:
• This option is not available for all models.
• Using this option may decrease overall throughput
To Next Page
Loading...
