A-61661 May 2010 5
The main ISIS Driver
window
The main ISIS Driver window provides a set of several tabs. You can
select each of these tabs and make any choices necessary to meet
your scanning needs.
The buttons on the bottom of the window apply to all the tabs:
Default ⎯ when you select Default, the values will be reset to the
factory defaults.
Copy ⎯ this function is only available when scanning two-sided
documents. The Copy button provides a convenient way to set up the
color, grayscale or black and white image settings on one side and
transfer them to the other. For example, if you highlight and set up
Front Image #1, you can use the Copy button to duplicate those
settings for Back Image #1.
OK ⎯ saves the values set on all tabs.
Cancel ⎯ closes the window without saving any changes.
To Next Page
Loading...
