Kodak i1405 - Starting the Scan Validation Tool

2 A-61661 May 2010
Starting the Scan
Validation Tool
1. Select Start>Programs>Kodak>Document Imaging>Scan
Validation Tool.
2. Select ISIS for the Driver Type and the Kodak Scanner i14XX
Scanner as the Driver. The Scan Validation Tool dialog box will be
displayed.
NOTE: For a description of the icons on the Scan Validation Tool
dialog box, see the section entitled, “Scan Validation Tool
dialog box” at the end of this guide.
3. Click the Setup icon . The Setup dialog box will be displayed.
4. Click ISIS to display the Main tab.