A-61661 May 2010 3
Using the ISIS driver The Kodak i1400 Series Scanners can provide a wide variety of
electronic images. This can be done by using the ISIS Driver which is
created and maintained by EMC Captiva and is provided with the
scanner by Kodak. Many scanning applications support ISIS drivers
and this driver can be used to interface with them. The ISIS Driver is
the part of the capture system which links the scanner to your scanning
application.
This guide provides descriptions of the options on the tabs of the main
ISIS Driver window and how to set these options.
For the purpose of this manual, all displayed windows assume the
features available on the Kodak i1405, i1420 and i1440 Scanners. If
you have a Kodak i1410 Scanner, all options are limited to one-sided
scanning only.
See the section entitled, “Starting the Scan Validation Tool” earlier in
this document to access the ISIS Driver.
To Next Page
Loading...
