A-61651 December 2009 2-1
2 Installation
Contents Installing the scanner.................................................................................2-1
Installing the Kodak Driver Software .....................................................2-2
Attaching the output tray........................................................................2-3
Connecting the power cord and USB cable...........................................2-3
Turning on the scanner ..............................................................................2-4
Turning off the scanner ..............................................................................2-4
Installing the scanner This section provides detailed information supporting the Installation Guide
that is provided with your scanner. Follow these steps in the order they are
provided to install your scanner.
NOTES:
• If you have already performed all of the steps in the Installation Guide, skip
this section.
• When positioning the scanner, be sure to provide adequate clearance at the
back of the scanner if you will be using the rear document exit. For more
information on the rear document exit, see the section entitled, “Adjusting
the output tray” in Chapter 3.
To Next Page
Loading...
