5-6 A-61651 December 2009
Cleaning the feed module
tires
8. Clean the feed module tires by manually rotating and wiping the feed
module tires with a roller cleaning pad. For best results wipe parallel to the
ribs in order to remove any residue between the ribs. You do not need to
remove the feed module to clean the tires.
9. Inspect the tires. If the tires show signs of wear or damage, replace the
feed module tires. See “Replacement procedures” later in this chapter.
Cleaning the Flippable
White background strips
10. Wipe the upper and lower background strips with a Staticide wipe.
11. Wipe the upper and lower background strips again with an almost-dry
Staticide wipe to remove any streaks.
To Next Page
Loading...
