A-61671 / TWAIN February 2013 55
• Pause Scanning (Interactive Multifeed): allows you to inspect a
preview image of the scanned page and choose to Accept the
scanned image or Rescan the page and discard the image from the
scan that triggered a multifeed alarm. The scanned images will not
be sent to the host application until accepted. This option allows all
multifeed events to be handled at the scanner. No image
manipulation is required in the scanning application. This option also
allows you to stay in front of the scanner reducing wasted movement
and fatigue. This option is provided by the scanner. No changes
to the scanning application are required.
NOTE: This option will automatically be enabled when the Pause
Scanning multifeed action is used if the scanner firmware is
Version 3.9.1 or higher.
The preview image will be oriented per the image processing
settings that were selected within the TWAIN Datasource (Rotate
90). If the scanning application is rotating the image or performing
other image processing, the preview image will not have scanning
image processing applied.
• If scanning in duplex (front and back), then both images will be
displayed.
• If scanning in black and white, a black and white image will be
displayed.
• If scanning in color/grayscale, a color/grayscale image will be
displayed.
• If scanning in dual stream, a color/grayscale image will be
displayed.
• If scanning in black and white using VRS software, a grayscale
image will be displayed.
• Accepting the images: if you want to accept the image, touch
Accept on the Operator Control Panel or press the Start/Resume
button on the scanner. When Accept is selected, the images shown
in the scanner’s preview will immediately be sent to the scanning
application and scanning will continue.
To Next Page
Loading...
