A-61504 October 2007 3-27
Device - General tab The General tab allows you to set scanner-specific options and
provides access to scanner diagnostics.
Paper source
• Document Feeder: the input elevator is in the highest position. This
selection is recommended when you are scanning 25 sheets or less.
• 100 Sheets: this selection is recommended when you are scanning
between 25 and 100 sheets.
• 250 Sheets: this selection is recommended when you are scanning
between 100 and 250 sheets.
• 500 Sheets: this selection is recommended when you are scanning
between 250 and 500 sheets.
Power Saver — allows you to set the amount of time the scanner has
to be inactive before going into power saver mode. You can turn this
option off or set a time from 5 to 60 minutes.
Document Feeder
• Timeout: allows you to select the amount of time the scanner will
wait once the last document enters the feeder before the timeout
occurs. You can turn this option off or set a time from 1 to 300
seconds.
To Next Page
Loading...
