A-61504 October 2007 3-43
Diagnostics - Logs tab The Logs tab allows you to view scanner information.
Logs
• General: displays the scanner’s version information, serial number,
attached/installed accessories, meters, etc.
• Operator: displays the scanner’s log. This log can only be cleared by
Kodak support personnel.
• Debug: displays communications between the scanner and a
scanning application. This option is only available when Logging is
turned on in the Debug tab on the Device Settings window. This log is
cleared each time the scanning application connects to the scanner.
Toolbar buttons
Save As: saves all the logs for viewing by Kodak support
personnel. When selected, you will be prompted for the location
to save the logs along with the option of including any debug
images.
Refresh: redisplays the log.
To Next Page
Loading...
