A-61601 February 2010 3-3
Scan Images screen When you click Continue on the Customer Order Information screen,
the Scan Images screen will be displayed.
Scan Settings — at the top of the Scan Images screen, the current
Scan Settings are displayed. If these settings are not acceptable, you
can change them by clicking the Settings button. For more information
regarding these settings, see the section entitled, “Scan Settings
screen”.
16-Up Display window — displays up to 16 images at a time.
Previous — goes back to the Customer Order Information screen.
Start Over — goes back to the Customer Order Information screen and
clears the system of all data for the current order. The confirmation
message Do you want to start over? This will delete all the files
that were scanned will be displayed.
Batch Scan — scans batches of photos using the s1220 Photo
Scanner.
Flatbed Scan — if an optional Kodak A3 or A4 Flatbed is attached, and
you select this option, photos will be scanned from the flatbed.
Image Cleaner Tool — when checked, the scanner will make every
attempt to eliminate any streaks in the image during the scanning
process. Applying the Image Cleaner Tool does not slow down the
scanning process. Frequently streaks in images are caused because
the scanner has accumulated dust and dirt. Be sure your scanner is
clean to help prevent streaks in images.
NOTE: The Image Cleaner tool is not applied to flatbed scans.
To Next Page
Loading...
