A-61601 February 2010 3-5
Scan Images screen
(continued)
When you click Batch Scan or Flatbed Scan on the Scan Images
screen, thumbnail images will be displayed in the 16-Up Display
window as the photos are being scanned. After the batch is scanned,
the photos will be rearranged and displayed in the order they were
scanned. You can edit the entire batch or individual images, or scan
another batch for that customer order.
NOTE: To edit an individual image, click on the thumbnail. The
Enhance Picture screen will be displayed.
16-Up Display window — displays up to 16 images at a time.
Scanning Completed — displays the Order Preview screen.
Start Over — goes back to the Customer Order Information screen and
clears the system of all data for the current order. The confirmation
message Do you want to start over? This will delete all the files
that were scanned will be displayed.
Batch Scan — allows you to scan another batch of photos into the
same order # from the Kodak s1220 Photo Scanner.
Flatbed Scan — allows you to scan another photo from the flatbed.
Rotates the image 90 degrees counter-clockwise (left).
Rotates the image 90 degrees clockwise (right).
Moves to the previous set of 16 images, if any.
Moves to the next set of 16 images, if any.
To Next Page
Loading...
