4-2 A-61601 February 2010
3. Adjust the side guides (by sliding them in or out) to accommodate
the size of the photos you are scanning.
4. Adjust the input tray. You can scan photos with the input tray open
or closed. Feed your photos with the input tray open if you are
scanning a batch of photos.
If space is limited and you want to close the input tray, you can easily
feed photos one at a time.
5. Adjust the output tray to accommodate your scanning needs.
• The standard output tray can be positioned so it lies flat on the
table. This position works well for scanning a few photos at a
time.
• The output tray can be extended to accommodate photos up to
14 inches in length.
Input tray - open position Input tray - closed position
To Next Page
Loading...
