4-4 A-61601 February 2010
Alternatively, take your photos and place them face up on the
table. Take the first batch from the top of this stack and place
them face up in the scanner. Select Batch Scan. When the
stack is completely scanned and the scanner has stopped,
place another stack in the scanner and select Batch Scan.
When you are using this method, the scanner should be allowed
to stop after each batch is scanned, otherwise the photos will
not be in the desired order.
Photo Prior versions This version
1 XXXX_09.jpg XXXX_01.jpg
9 XXXX_01.jpg XXXX_09.jpg
To Next Page
Loading...
