6-2 A-61601 February 2010
• Adhesives — sticky substances such as glue and other album-
related adhesives on photos, can be transferred to the imaging area
of the scanner. Remove the adhesive with appropriate cleaners.
Photos with adhesive substances can also be scanned from the
Kodak A3 or A4 Flatbed Accessory thus preventing these substances
from gathering in the scanner.
• Uncurling photos — photos that have significant curl may not
transport effectively through the scanner. If possible, stacks of photos
may be safely uncurled before scanning.
NOTE: Photos that are severely curled can either be rotated 90
degrees so the curl is not in the direction of the transport or
scanned from the Kodak A3 or A4 Flatbed Accessory.
• Fanning photos — for reliable feeding, fan the photos before
scanning.
• Always place a blank placeholder top sheet on top of the stack of
photos being scanned. This top sheet protects the top photo from tire
marks as the last photo before the top sheet is fed into the scanner.
This top sheet is a good place to record customer information since it
will be scanned with the photos.
To Next Page
Loading...
