A-61602 January 2008 11
Verifying for a USB port After you install the Kodak Driver Software, check for the presence of a
USB port.
• Select USB Test.
The USB verification tool will check your operating system and
hardware capability to determine if you need to install the USB card.
• If a functioning USB 2.0 port is present, the following window will be
displayed. Click OK and proceed with the next section.
• If your PC does not have a USB 2.0 port installed the following
window will be displayed, you should install a USB 2.0 Accessory
card.
• If you get any message other than either of the messages above, see
the section entitled, “USB connection issues” in Chapter 6
Troubleshooting.
To Next Page
Loading...
