A-61602 January 2008 89
Testing for a USB
connection
When the Kodak device drivers for the Kodak ScanMate i1120 Scanner
is installed, a copy of the USB test software will also be installed. It will
be located in this folder (by default) along with the Kodak Scan
Validation Tool software:
C:\program files\Kodak\Document Imaging\usbtst.exe
If you run this executable (usbtst.exe), it will display a set of USB values
and protocols. At this time, the software application will function in all
operating systems, but will only be valid with Windows XP.
If a shortcut of the executable is created, and the /test switch is added
to the end of the “Target:” path (to the right of the quotes), then when it
is launched from the shortcut it will run the dialog boxes as listed above
and function accordingly with all the operating systems.
To verify USB port speed with the scanner, run the Scan Validation Tool
software, and select the Info tab. USBSCAN/x.x will be displayed in
parentheses in the Driver: box. x.x is the speed the scanner is actually
communicating.
To Next Page
Loading...
