A-61602 January 2008 29
Configuring function
numbers
1. Click the smart touch icon on the system tray to display the smart
touch function listing and select Configure.
The Configuration dialog box will be displayed.
2. Select the Task shortcut you want to configure from the Task
Shortcut drop-down list.
3. If you want to rename the Task Shortcut, click Rename. The
Rename dialog box will be displayed.
• Enter the desired name and click OK.
4. Select the desired destination from the Destination drop-down list.
5. Select the desired file type from the File Type drop-down list. This
determines the file type of the electronic file to be created.
To Next Page
Loading...
