A-61602 January 2008 55
Adjustments tab: color
or grayscale
The options available on the Adjustments tab depend on the Scan as
selection on the General tab. The following options are based on a
Scan As selection of Color or Grayscale.
Brightness — changes the amount of white in the color or grayscale
image. The values range from -50 to 50. The default is 0.
Contrast — makes the image sharper or softer. The values range from
-50 to 50. The default is 0.
Red — changes the amount of red in the color image. The values range
from -50 to 50. The default is 0. Does not apply to grayscale images.
Green — changes the amount of green in the color image.The values
range from -50 to 50. The default is 0. Does not apply to grayscale
images.
Blue — changes the amount of blue in the color image. The values
range from -50 to 50. The default is 0. Does not apply to grayscale
images.
To Next Page
Loading...
