6 A-61602 January 2008
Installing the Kodak
Driver Software
Install the driver software before connecting the scanner to your PC.
1. Insert the Kodak ScanMate i1120 Scanner Installation CD in the
CD-ROM drive. The installation program starts automatically.
NOTE: If the CD does not start automatically, open the My
Computer icon on your desktop. Double-click the icon for
your CD-ROM drive, then double-click on Setup.exe.
2. Select Install Scanner Software.
3. The Kodak ScanMate i1120 Scanner Installation window will be
displayed.
NOTE: This window may or may not be displayed depending upon what
other Kodak Scanners may have been previously installed on
your computer.
4. Click Yes.
To Next Page
Loading...
