22 A-61602 January 2008
The main Kodak Scanner window will be displayed.
5. Select the Default Setting Shortcut.
6. Click OK. This resets the software to the factory-installed default
settings. The factory default settings are set to capture black and
white images. The Scan Validation Tool dialog box will be displayed.
7. Place some test documents into the input tray of the scanner. If you
are scanning one-sided documents, be sure the side you want to
scan is facing the input tray.
8. Click the Start Scanning icon on the Scan Validation Tool dialog
box.
To Next Page
Loading...
