60 A-61602 January 2008
Images to Configure — indicates which electronic images you need to
configure.
NOTE: This is only available if you select anything other than One from
the Images per side option. For procedures on how to configure
advanced options, see the sections that follow, entitled:
• Creating multiple images for each side of a document,
Example 1.
• Creating different settings for each side of a document,
Example 2.
When available, use the up and down arrows to select the order the
images will be delivered by the scanner to the scanning application.
Toolbar buttons:
Done — returns you to the Image Settings window.
Add: adds an image type to the bottom of the configuration list.
Change: allows you to change the currently selected image
type.
Delete: removes the selected image type.
To Next Page
Loading...
