62 A-61602 January 2008
7. By default the scanner will produce the color/grayscale image first
and deliver it to the scanning application, then it will produce and
deliver the black and white image. If you want the black and white
image to be produced and delivered first:
• make sure Black and White(1-bit) is selected
• select Move up to place the black and white image first in the list.
8. Select Done to return to the Image Settings window.
NOTE: You will notice that the Side option now has two entries:
Both: Color (24 bit) and Both: Black and White (1bit).
9. Select Sides: Both: Color (24-bit).
NOTE: Make any other adjustments to the color image settings on
the rest of the tabs on the Image Settings window.
10.Select Sides: Both: Black and White (1-bit).
NOTE: Make any other adjustments to the black and white image
settings on the rest of the tabs on the Image Settings
window.
11. When finished, select Home to return to the main Kodak Scanner
window and then select Save to save your selections to the
shortcut.
To Next Page
Loading...
