www.kodak.com/go/docimaging 111 of 144
Vertical lines appear on the
scanned document.
The ADF glass areas or the flatbed
glass is dirty.
Clean the ADF glass areas and the
flatbed glass. See page 85.
The reference plates or the flatbed
sheet is dirty.
Clean the reference plates and the
flatbed sheet. See page 85
.
The scanning density is
uneven.
The ADF glass areas, reference
plates, flatbed glass, or flatbed sheet is
dirty.
Clean the ADF glass areas, reference
plates, flatbed glass and flatbed sheet.
See page 85
and page 90.
The distribution of the quantity of light
in the scan varies.
Perform the shading adjustment.
See page 136
.
The color of the scanned
document is very different
from the original document.
The settings of the computer display or
the monitor are not correct.
Adjust the computer display and monitor
settings.
Dark spots or noise appear
on the scanned documents.
The ADF glass areas, reference
plates, flatbed glass, or flatbed sheet
are dirty.
Clean the ADF glass areas, reference
plates, flatbed glass and flatbed sheet.
See page 85
and page 90.
Image crop failures with
VRS scanning.
There are unwanted objects such as
paper or dust on the reference plates.
Examine and clean the reference plates.
See page 85
.
Symptom Possible Cause Remedy
To Next Page
Loading...
