www.kodak.com/go/docimaging 68 of 144
Using the Flatbed
You can use the Trūper flatbed to scan a single sheet or to scan material that you do not want to take apart
before scanning. For example, you can use the flatbed to scan the pages of an open book. Scanning
documents in this way is known as “scanning with the flatbed.”
Caution
Do not place floppy disks or any items containing magnetic media on the flatbed. The flatbed
sheet contains magnets that may damage data stored on floppy disks or magnetic media.
Raise the feeder tray in the direction of the arrow until the tray clicks into place.
Open the document cover in the direction of the arrow.
In the scanning application, select Flatbed Mode.
1
2
Document cover
Feeder tray
Flatbed sheet
3
To Next Page
Loading...
