www.kodak.com/go/docimaging 90 of 144
Cleaning the Flatbed Glass and Document Cover Detector
Preparation: Locate the blower accessory and remove the brush from the blower. Open a package of the
roller cleaning paper, as described in “
Roller Cleaning Paper” on page 78.
Press the power switch to the OFF position.
Raise the feeder tray in the direction of the arrow until the tray clicks into place.
Open the document cover in the direction of the arrow.
Roller cleaning paper
Blower accessory
Dotted line
Blower
Sensor or detector
1
2
3
Document cover
Feeder tray
To Next Page
Loading...
