www.kodak.com/go/docimaging 25 of 144
Installing the Scanner
Quick Installation Checklist
Read the Trūper 3210 Operator Manual located on the Trūper Installation CD-ROM.
Insert the CD-ROM into the appropriate drive on the computer. Microsoft Autoplay will start,
displaying the Select Your Language screen. Select your language and click OK. On the
CD-ROM Main Menu click the image of the Trūper 3210 scanner, select View Manuals, then
select Trūper Operational Manual.
If Autoplay is disabled, go to the Windows taskbar, select Start, Run and type
D:\SETUP.EXE, where “D” is the CD-ROM drive. Click OK. Select your language and click
OK. Then locate the manual, as described above.
Verify the computer system requirements.
Refer to “
Computer System Requirements” on page 14.
Attach the feeder tray to the scanner.
Connect the scanner.
Refer to “
Initial Setup and Installation” on page 28.
Install the software.
Refer to “
Initial Setup and Installation” on page 28. You can also access the Trūper 3210
Operator Manual from the Trūper User Utility. Click the Trūper User Utility icon on your
Windows desktop, then click Help.
The Trūper 3210 Operator manual can change without notice. Go to www.bbhscanners.com
to download the most current manual.
You are now ready to scan.
Refer to the instructions for your scanning or document management software application.
1
2
3
4
5
6
To Next Page
Loading...
