www.kodak.com/go/docimaging 44 of 144
Step 4 Application
• Click Step 4 Application to install your scanning application.
Driver Selection: Scanning Applications with VRS Connectivity
VirtualReScan is compatible with most scanning applications. When starting your scanning
application, you may be requested to select a scanner or a scanner source. Depending on your
application, select one of the following:
• For ImageControls applications, set Scanner Source to: Bowe Bell & Howell 3210 with
SVRS.
• For ISIS applications, set Scanner Selection to: Kofax VRS Scanner. This is the certified
ISIS driver for this configuration. DO NOT select Bowe Bell and Howell 3210.
• For TWAIN applications, set Scanner Selection to: Kofax Software VRS - TWAIN.
Contact your application reseller for more information.
Scanning Applications with Direct ISIS connectivity
Occasionally, an ISIS application based on PixTools may not support the recommended VRS-
based ISIS driver. Check with your application reseller to determine if your scanning application is
compatible with VRS or requires the use of a Direct ISIS driver. For Direct ISIS connectivity, select
the following driver:
• ISIS Application Scanner Selection: Bowe Bell and Howell 3210. This is the certified ISIS
driver for direct connectivity.
To Next Page
Loading...
