www.kodak.com/go/docimaging 51 of 144
Glued or curled documents may cause a paper jam or damage the ADF unit. Scan this type of document
using the flatbed.
The height of the documents placed in the feeder tray must not exceed the paper limit mark that
appears on the right side of the document guide. (See the diagram on page 56.
)
The following chart indicates the maximum number of sheets that can be loaded on the feeder tray:
Sheets that are exceptionally thick or thin should be placed in the ADF manually, one sheet at a time, or
they should be scanned using the flatbed.
Curled, wrinkled, or folded documents may not scan properly. Check the allowances for curl and fold
in the following diagram:
Paper weight (pounds) 11 14 17 20 21 24 28 34
Paper weight (grams/meter
2
)
40 52 64 75 80 90 104 127
Maximum number of sheets 320 260 200 170 160 140 120 100
Curl must be
less than 0.20
inches (5 mm)
Fold must be
less than 0.20
inches (5 mm)
Feeding direction
Feeding direction
To Next Page
Loading...
