www.kodak.com/go/docimaging 56 of 144
Caution
The height of the documents placed in the feeder tray must not exceed the paper limit mark that
appears on the right side of the document guide. Placing more sheets in the feeder tray may
cause a paper jam.
Do the following to configure the driver:
• Open the Scanner Properties window.
• Select ADF from the Source drop-down list and click OK.
You are now ready to scan. Refer to the instructions for your scanning or document management
software application.
Loading Landscape
Loading Portrait
Paper limit
mark
7
To Next Page
Loading...
