www.kodak.com/go/docimaging 84 of 144
Use the roller cleaning paper to remove the dirt from the surfaces of the six (6) free rollers.
Hold the roller to prevent it from rotating, then wipe the roller from one side to the other in the
direction of the arrows shown in the diagram. Turn the roller as you continue to wipe and clean all
the way around the roller.
Close the exit door.
• When you close the exit door, close it securely until the door is locked. Do not slam the exit
door.
When finished, clear the clean roller counter as described in step 6.
After cleaning the rollers, click the icon to open the Trūper User Utility. Select the User Utility
option to clear the roller cleaning counter. See “
Scanner Counter” on page 104.
4
Free rollers
5
6
To Next Page
Loading...
