Configuration of Equipment CVS-126
xii 0093132702-08
Essential Option
No Name of item Type Remark Weight/
Length
Quantity
1 Transducer Type of transducer transducer cable (with
connector at one end)
9m 1
Type of transducer
No Specification Frequency Material /
Length of
the cable
Mounting method
Note
Beam width
(Right and left x back
and forth)
1 TD-500T-2B
50/200 kHz
600 W
Plastic
9m
Inner-hull 50kHz
50°x50° ( -6dB)
200kHz
17°x17° ( -6dB)
2 TD-500T-3B
50/200 kHz
600 W
Bronze
9m
Through-hull 50kHz
50°x50° ( -6dB)
200kHz
17°x17° ( -6dB)
AIRMAR’s Transducer model P66 is also applicable. (Owner supply)
1
P66
50/200 kHz
600 W
Plastic
10m
Transom
With water
temperature sensor
and speed sensor.
(The CW-840-0.3M is
needed)
50kHz
69°x69° ( -6dB)
200kHz
16°x16° ( -6dB)
Option List
No Name of Item Specification Remark Weight/Length
1 Water temperature
sensor / speed
sensor
ST-80 For transom mounting
Plastic made (with cable)
0.3kg/
8m
ST-90 For Through-hull mounting
Plastic made (with cable)
0.6kg/
8m
ST-100 For Through-hull mounting
Bronze made (with cable)
1.2kg/
8m
2 GPS sensor GPS-20A-10M-B
[KODEN]
For GPS measuring
(With power & signal cable)
0.25kg/10m
3 Inner-hull kit MFB-04 Plastic made for installing the
transducer TD-500T-2B
1.3kg
4 Cable for transducer CW-840-0.3M Needed when using the
optional water temperature
sensor / speed sensor.
30cm
5 Connector for GPS
sensor
LTWBD-06PMMP-LC Needed when using the
GPS-20A (Type B) sensor.
Caution: For Inner-hull installation, an Inner-hull kit is necessary.
To Next Page
