Koden CVS-126 - 2.8 Zoom Range Setting; 2.9 Zoom Start Point Setting; 2.10 Preset Range Setting

Chapter 2 How to use the menu CVS-126
2-4 0093132702-08
5 Press the [MENU] key to close the menu.
For each zoom display, refer to [1.4 Switch-over
of Display mode].
2.8 Setting of Zoom Range
Set the zoom range in each mode of [BTM],
[Bottom Discrimination], [Zoom], [Bottom Zoom]
and [Bottom Follow Zoom]
The zoom range of each mode is identical.
(See [1.4 Switch-over of Display mode])
(Setting: m: 2.5 to 200, fm, I.fm: 2.5 to 150,
ft:10.0 to 650)
Zoom Range
1 Press the [MENU] key.
2 Select [D. Range]  [Zoom range]. (See
[2.1 How to operate the menu])
3 Press the [ ] key.
4 Change the set value of [Zoom range].
(Press the [
] key or [ ] key)
Zoom Range
10.0
m
5 Press the [MENU] key to close the menu.
2.9 Setting of Zoom Start
Select the zoom start in the [Zoom].
(See [1.4 Switch - over of Display mode])
(Setting: m: 0 to 800, fm, I.fm: 0 to 800, ft: 0 to
2800)
Zoom Start
1 Press the [MENU] key
2 Select [D. range]  [Zoom start] (See [2.1
How to operate the menu])
3 Press the [ ] key.
4 Change the set value of [Zoom start].
(Press the [
] key or [ ] key)
Zoom start
10
0~800 m
5 Press the [MENU] to close the menu.
2.10 Preset of Range
The range switched with the [
RANGE ] key
can be set.
Preset the set value suitable for your purpose.
(Setting range: m: 2.5 to 800, fm, I.fm: 2.5 to
800, ft: 10 to 2800)
1 Press the [MENU] key.
2 Select [D.range]→[Range preset]→[Range
1 to 8]. (See [2.1 How to operate the
menu])
3 Press the [ ] key.
Zoom type
BTM.
Zoom
B.Z.
B.D.
B.F.Z.
0-800