EasyManua.ls Logo

KODERA CASTING C372A - Page 3

KODERA CASTING C372A
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Warning : To replace the cutting blade and guide, attach the blade cover.
If not observed, injury may result.
Cautions : Do not touch a switch with a wet hand.
If not observed, electric shock may result.
Cautions : Do not sprinkle water over the unit.
If not observed, electric shock may result.
Cautions : Do not block the ventilator.
The overload may lead to a faulty condition.
Cautions : Observe the capacity of the breaker and fuse.
Do not substitute a fuse with wire or other objects. This may cause fire.
If the breaker is down or fuse is melt often, contact your local sales agent.
Cautions : If you notice any abnormality (burnt smell, etc.), stop the operation immediately,
turn off the switch and contact your local sales agent.
If you keep the operation with the presence of abnormality, faults, electric shock or fire may
result.
Cautions : Do not stand or place any objects on the unit.
Injury may result due to falling.
Cautions : When cleaning, maintenance, or inspection, be sure to unplug the power cord
so that the machine is not powered.
If not observer, injury or electric shock may result.
Cautions : Please consult your local sales agent for repair.
If not repaired properly, it may cause electric shock or fire.
Cautions : A tape measure is provided under the operation panel of this unit,
but if you need more accurate length, measure with your own measure device.
Blade cover