Koei Industry Nucom Series - Table of Contents

ＡＣＴ－Ｎ０２Ｅ－１
CONTENTS
1. GENERAL
2. CONFIGURATION
2-1 Configuration and names of parts
2-2 Dimensions
3. SPECIFICATION
4. OPERATION PRINCIPLE
4-1 Operation principle
4-2 Block diagram
5. INSTALLATION
6. WIRING
6-1 Cables
6-2 Water prevention
7. ASSEMBLY WITH A VALVE
7-1 Names of parts
7-2 Assembly procedures
8. POWER AND SIGNALS
8-1 Power source
8-2 Fuse and breaker
8-3 Input signals
8-4 Wiring diagram
9. CONTROL PACK (Module)
9-1 Names of parts
9-2 Direction mode
9-3 Mode selection during signal interruption
9-4 Sensitivity volume
9-5 ZERO / SPAN adjustment
10. OPERATION
10-1 Manual operation
10-2 Power operation
11. ADJUSTMENT
11-1 Potentiometer and limit switches
11-2 Mechanical stop
12. TROUBLE AND SOLUTION
13. MAINTENANCE
14. OPTIONAL EXTRAS