Kohler Command PRO EFI Series User Manual

Governor System
5762 690 05 Rev. E KohlerEngines.com
New Updated Design
P
This Governor Control Unit has a
Non-Serviceable Electrical Connection.
DO NOT SEPARATE
C
N
M
K
J
I
This Governor Control Unit has a
Non-Serviceable Electrical Connection.
DO NOT SEPARATE
N
I
O
M New Updated Design N
New Sealed (Bonded)
GCU Module
Wiring Harness
Assembly
O
4 Pin GCU to Main
Engine Harness
P Speed Control Input
New Updated Design features a sealed (bonded) GCU
module wiring harness assembly that must NOT be
separated. This design is easily identifi ed by 3 screws
that secure DLA actuator bracket. This design also
has GCU wire tie-down bracket, plus a 4 pin connector
with speed input wire red w/yellow tracer. See pages
72-78 for an engine with new updated design electronic
governor.

Kohler Command PRO EFI Series Specifications

General

Fuel System	Electronic Fuel Injection (EFI)
Starter	Electric
Governor Type	Mechanical
Lubrication	Full Pressure
Cooling System	Air Cooled
Ignition System	Electronic
Engine Type	4-cycle, single cylinder, overhead valve (OHV)