Kohler KD62V12 User Manual

Repair
Driving gear
Fig. 105: Torsional vibration damper bolts
Reference
Key
Screw specifications
Lubricant *
Reuse**
Torque Angle (°)
Step
± 5%
Step
± 5°
1 056AC M28x2x122 - No 1 430 Nm
317 ft-lb
2 75°
Tab. 22: Tightening specifications table
*Lubricants:
MG = Molykote G-n-plus
MW = Castrol Optimol paste white T
MH = Molykote HSC
O = Engine oil
XX = Loctite 243
YY = Loctite 577
**Refer to screws reuse rules. (For more information see: 5.3.2 Screws pre-tightening, reuse,
and marking, page 268.)
Sampling silicon oil from torsional vibration damper - SL2-1345
Previous tasks
Make sure that the following tasks are performed:
q Torsional vibration damper is cool enough to be touched with bare hands.
q The area around the sample openings is clean and free from engine oil and dirt.
q Torsional vibration damper cover is removed.
Specific safety instructions
Not applicable.
104
© 2022 by Kohler Co. All rights reserved.
KD62V12 33525088601_8_1 EN_US
2022-09

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English