Kohler KD62V12 User Manual

Contents
3.13.1 Power take-off (PTO) and battery charging alternator removal and
installation (SL 218, SL 223) 233
3.13.2 Starter removal and installation (SL 260)
240
3.14 Exhaust gas aftertreatment system (depending on configuration)
246
3.14.1 Removing and installing diesel exhaust fluid injector (SL2-5330)
246
3.14.2 Diesel exhaust fluid pump removal and installation (SL2-5340)
252
4 Tools and devices
258
4.1 Tools
258
4.1.1 Special tools
258
4.1.2 Turning device
261
5 Appendix
266
5.1 Technical design documents
266
5.2 Cleaning agents, thread-locking adhesives and greases
267
5.2.1 Cleaning agents, thread-locking adhesives and greases
267
5.3 Standard tightening torques
268
5.3.1 Lubricant and threadlocker application rules
268
5.3.2 Screws pre-tightening, reuse, and marking
268
5.3.3 Standard torques for hexagonal / socket / flange screws and
hexagonal / flange nuts 271
5.3.4 Standard torques for internal drive pipe plug with conical thread
272
5.3.5 Standard torques for screws according to DIN 7643, DIN 910, DIN 908
272
5.3.6 Standard torques for flange joints
274
5.3.7 Assembling pipes with cutting rings
280
5.3.8 Standard torques for triple lock flange joints
281
5.3.9 Standard torques for VSTI screw plugs for steel and iron cast part
282
5.3.10 Standard torques for VSTI screw plugs for aluminium
283
5.3.11 Assembling pipes with DKO connectors (EL, ET, EW, GZ, GZR, RED)
285
5.3.12 Standard torques for collar clamps
286
5.3.13 Standard torques for pipe clamps according to DIN 3015
287
5.4 Abbreviations - Acronyms
288
5.5 Unit conversion tables
290
5.5.1 Length conversion factors
290
5.5.2 Mass conversion factors
290
5.5.3 Pressure conversion factors
290
14
© 2022 by Kohler Co. All rights reserved.
KD62V12 33525088601_8_1 EN_US
2022-09

Kohler KD62V12 Specifications

General

Brand	Kohler
Model	KD62V12
Category	Engine
Language	English