Repair Service and Repair Manual
Exhaust gas system
q Remove turbocharger bracket. (For more information see: 3.8.5 Turbocharger brackets removal
and installation, page 180.)
Specific safety instructions
WARNING
Risk of injuries by contact with hot surfaces!
Engine is hot near operating temperature.
u Avoid any contact with the engine, parts carrying hot coolant or oil, the exhaust system, the
turbocharger, the heat protection, the battery and the covers.
u After the temperature has cooled down to a level it can be touched, proceed with the tasks on
the engine.
Special tools
Not applicable.
Consumables and equipment
– Hot temperature grease
– Rags
Overview
Fig. 212: Task overview
1 Seal 10 Sealing ring
2 Outlet manifold 11 Plug
3 Screw (M10) 12 Outlet manifold
4 Seal 13 Outlet manifold
5 V-clamp 14 Outlet manifold
6 Compensator 15 Plug
7 Outlet manifold 16 Sealing ring
See next page for continuation of the image legend
188
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07
To Next Page
Loading...
Need help?
General
