Maintenance Operation and Maintenance Manual
Lubricating system
Fig. 71: Filling engine oil — right side
1 Dipstick 2 Filler neck
Fig. 72: Oil dipstick marking
u Remove oil filling cap.
u Fill with oil via filler neck 2 until between “min.” and “max.” marks on the dipstick 1 (stopped side
of the dipstick).
u Clean oil filling cap, place on the filler neck and tighten by hand.
u Start the engine.
u Check oil pressure (engine oil pressure display unit) and check oil filter for leaks.
u Shut down the engine.
u After 2 to 3 minutes, check oil level on the dipstick. (For more information see: 5.7.3 Checking
the engine oil level — SL001, page 101)
110
© 2018 by Kohler Co. All rights reserved.
KD83V16 33521030601_0_1 EN_US
2018-07
To Next Page
Loading...
