2
16
SAFETY INFORMATION
EN
2.3 Safety signal description
• To ensure safe operation please read the following statements
and understand their meaning.
• Also refer to your equipment manufacturer's manual for other
important safety information.
• This manual contains safety precautions which are explained
below.
• Please read them carefully.
Danger
• This indicates situations of grave danger which, if ignored,
may seriously threaten the health and safety of individuals.
Important
• This indicates particularly important technical information that
should not be ignored.
Warning
• This indicates that failure to comply with it can cause minor
damage or injury.
Read the Operation and Maintenance handbook before
performing any operation on the engine.
Hot Parts.
Danger of burns.
Presence of rotating parts.
Danger of jamming or cutting.
Presence of explosive fuel.
Danger of re or explosion.
Presence of steam and pressurized coolant.
Danger of burns.
Use protective gloves before carrying out the operation.
Use protective glasses before carrying out the
operation.
Use sound absorbing protections before carrying out
the operation.
Lifting point.
Electrical shock.
Danger of severe scalding or death.
High pressure uid.
Danger of uid penetration.
Lethal Exhaust Gases.
Danger of poisoning or death.
UM KDI 1903TCR_2504TCR _ cod. ED0053029490 - 2° ed_rev. 01
To Next Page
Loading...
Need help?
General