qb701 User’s Manual
33
Keys legend can be invoked by key
Press key to toggle between parallel/shimming values screens.
Press key to choose plane (9-3 or 12-6) in which parallel
correction will be performed.
To make correction in 9-3 plane transducers must be placed at 9
or 3 o’clock position.
To make correction in 12-6 plane transducers must be placed at 12
or 6 o’clock position.
Use arrows keys to choose position at which transducers will be placed.
Turn shafts to place transducers in this position then press key.
To Next Page
Loading...