15
Installing the Batteries
1. Insert a coin into the grove on the battery cover and turn it clockwise until the grove is aligned
with the “unlock” symbol and remove the battery cover.
2. Insert the battery into the remote control with the Positive (+) side facing up.
3. Install the battery cover back on the remote control using a coin and turning it
counterclockwise until the grove aligns with the “lock” symbol.
Note:
• In order for the remote to function properly, the distance between the remote and the air
conditioner should not exceed 16ft (5m).
• Electronics may interfere with the signal from the remote. This can be resolved by moving
closer to the air conditioner when using the remote.
Caution: Use only a CR2025 3V battery. Remove the battery if the remote control will not be used
for one month or longer. Do not attempt to recharge batteries that are not designed to be
recharged. Do not dispose of batteries in a fire as they may explode.
To Next Page
Loading...
Need help?
General
