[ENT] Enter to next step
Combination Key
[SET OUT] Start Stake Out function. Press [SHIFT][INT] to enter.
[INV] Inverse the code staff (0 scale on top) then it will display a “T” on the screen after
activate. Press [INV] again to back for normal mode, the value will be minus. Press [SHIFT]
[MODE] to enter.
[FNC] Activate the other functions on KL-03. Press [SHIFT][USER] to enter.
[MENU] Menu setting. Press [SHIFT][PROG] to enter.
[ ] is for illumination. Press[SHIFT][DATA] to activate.
[PgUp] Page Up. Press [SHIFT][↑] to enter.
[PgDn] Page Down. Press [SHIFT][↓] to enter.
Symbols (on the screen)
[1 / 3] means the first of total 3 pages. Press “PgUp” or “PgDn” to check the other pages.
[←→] Use the navigation key to select.
[OK] OK and exit this interface.
[↑↓] Skip to next column.
Battery capacity.
E: Correction of earth curvature has been activated.
T: Inverse the staff and start the measurement. This mode is only for inverse code staff.
N: Numeric keyboard has been activated.
α: Alphabetic keyboard has been activated.
To Next Page
Loading...
