CAUTION
Soil and sand accumulated on tail gate top (1) may fall. When approaching for testing or maintenance,
check that no soil or sand is accumulated.
NOTICE
Do not use a tailgate if the dump body is loaded with rocks, gravel, or sticky material such as clay.
There is a danger that the tailgate may be damaged, the operator's cab may be pushed up by the loaded
material caught in the tailgate during dumping operations.
Install a tailgate when hauling fluid materials such as finely
crushed soil.
When removing or installing the tailgate, consult your Komatsu
distributor.
METHOD FOR DUMPING
WARNING
• Always follow the instructions of the signalman when
performing dumping operations.
• When dumping large rocks, operate the dump body
slowly.
• When performing inspection or maintenance with the
dump body raised, always use the body pivot pin and
lock the dump lever at “HOLD” position.
For detail, see “BODY PIVOT PINS (3-117)”.
Operate the dump body as follows.
1.
Set gear shift lever (1) to NEUTRAL position (N), and set
parking brake switch (2) to “PARKING” position.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-202
To Next Page
Loading...
